Not every erosion control challenge calls for the same solution. A steep highway embankment, a wetland edge, and a fast-moving drainage channel each place different demands on the materials protecting them, and treating them the same way often leads to premature failure and costly rework.
Choosing the right natural fiber solutions for each site condition is what separates a project that holds up for years from one that needs repeated repairs.
RoLanka International manufactures a range of coir-based products, each engineered for specific site conditions rather than built as a one-size-fits-all fix. This guide walks through six common site types and the coir solution best suited to each.
Stream Restoration
Streambanks face constant pressure from current velocity and wave action, and they need immediate structural protection while new vegetation takes root. BioD-Roll, RoLanka’s densely packed coir log, is built for exactly this. Its outer net has a 2-inch by 2-inch opening and lasts at least three years, while the inner coir core holds up for more than a decade, giving the bank sustained protection well beyond the initial installation.
Dry coir logs, installed without pre-grown vegetation, provide stronger initial protection than vegetated logs and are significantly easier and less expensive to transport and install. Native plants are added on and around the logs after installation, allowing roots to establish naturally as sediment builds up around the log over time.

Roadside and Transportation Corridor Stabilization
Highway and roadside slopes face years of exposure to rain, runoff, and constant grading changes, often while meeting strict environmental compliance standards. BioD-Mat, RoLanka’s woven bristle coir blanket, is engineered specifically for this kind of long-term exposure. With a functional field longevity of 4 to 6 years, it offers sustainable construction erosion control that outlasts temporary mulches while supporting seed germination along the way.
Because BioD-Mat comes in multiple weights, from BioD-Mat 40 through BioD-Mat 90, it can be matched to the specific flow conditions and slope grade of a given corridor, rather than forcing every roadside slope to use the same blanket regardless of severity.
Wetland Restoration

Wetland projects require a material that supports rapid vegetation establishment in consistently wet or saturated conditions, often on soil that is difficult to vegetate through conventional planting alone. BioD-Pillow, a coir fiber revegetation pad, is designed for exactly this. It can be pre-vegetated in a nursery and then installed in the field to help establish new wetland areas quickly.
BioD-Pillow also holds seeds in place and provides a stable medium for germination, and it can be used to build floating islands that create spawning habitat for aquatic species while trapping sediment from runoff water, making it one of the more versatile nature-based erosion control options for wetland-specific work.
Drainage Channels
Channels and inlets need a bioengineering erosion control product that filters sediment without blocking water flow entirely. BioD-Watl, a lightly packed coir wattle, fills this role well. Its open netting allows water to pass through gradually while trapping sediment, making it effective for check dams, curb and inlet protection, and general channel restoration work.
Because BioD-Watl can be cut and joined to any length, it adapts easily to irregular channel geometry without requiring custom-sized materials.
Steep Slope Stabilization

Steep or severely damaged slopes often need more than surface protection. They need structural reinforcement built directly into the bank. BioD-Block, a fabric-attached coir block system, is engineered for this. It’s used to construct vegetated soil lifts, layering coir blocks with soil and live plantings to reinforce a slope as vegetation establishes.
According to USDA soil bioengineering guidance, matching support materials to a site’s specific stress conditions is essential for long-term stabilization success, which is exactly the role BioD-Block’s built-in planting holes and structural connectors are designed to fill.
Shoreline Projects
Shorelines along lakes, rivers, and reservoirs deal with a mix of wave action and fluctuating water levels, so they often benefit from a combination of products. BioD-Roll provides immediate structural resistance to wave energy, while BioD-Block adds reinforcement for shorelines with steeper grades or a history of repeated erosion. Together, these shoreline erosion control solutions address both the immediate and long-term stability of the bank.
Matching the Right Product to Your Site
Selecting the right coir product comes down to understanding what a site actually needs: structural resistance, sediment filtration, extended surface protection, or rapid vegetation support. RoLanka’s range of environmental restoration materials covers each of these needs individually, rather than relying on a single product to do every job.
As a quick reference:
- Streambanks and fast-moving water: BioD-Roll
- Roadside slopes and transportation corridors: BioD-Mat
- Wetland creation and revegetation: BioD-Pillow
- Drainage channels and sediment control: BioD-Watl
- Steep or severely damaged slopes: BioD-Block
- Lake, river, and reservoir shorelines: BioD-Roll and BioD-Block
Matching the product to the site this way, rather than defaulting to whichever material is most familiar, is what makes these natural fiber solutions perform as intended over the long term.
Build the Right Solution for Your Site with RoLanka International Inc.
Choose RoLanka International Inc. for BioD-Roll, BioD-Mat, BioD-Watl, BioD-Block, BioD-Pillow, and other natural fiber solutions engineered for streambanks, transportation corridors, wetlands, and shorelines. Explore our full range of natural erosion control solutions built for every site condition. Contact RoLanka International Inc. today to find the right product for your next project.